The Eerder Full metal Clamp fits the Eerder Full metal Bracket and the Brompton front carrier block. It features 4 mounting points which correspond with the hole pattern of the Eerder Framehugger Mk4 to Mk7. So it can be bolted to the Framehugger to create a super versatile mini rack. But of course it can be bolted to a lot of other objects, like baskets, crates, containers, a DIY wooden platform, whatever you can think of. Let your imagination go wild!

The Mk4 features a stop bridge to define the max amount of tension/preload on the wedge shape. The problem with high loads is that the wedge design might clamp pretty tight on the carrier block. The longer the ride, the more bumps, the heavier the load, the tighter it gets. Probably more of an issue on the Full metal Bracket than on the flexy plastic Brompton carrier block. To prevent this I finally offer this solution in the form of the Full metal Stop bridge.

The Full metal Stop bridge is screwed to the top side of the Clamp limiting how far the Clamp can slide down over the carrier block and defining the amount of preload. A little bit of preload is nice to have to prevent rattling. When putting the clamp on the bracket the Stop bridge is just free from the carrier bracket's top side, but under load it comes into action and the carrier block will bump onto the stop brdige. This way it takes just a little tug to unwedge it from the Carrier block.

Compatible with the Full metal Bracket and the original Brompton #frontcarrierblock

Material: stainless steel AISI 304, Tig fusion welded

Finish: Raw stone tumbled and Scotch Bryte brushed stainless steel

Hardware: 4 pc M5x10mm bolts to fit is to the Framehugger. If you need a different bolt length for your application just let me know and I'll include it.

Weight: 203 gram

Load capacity: more than you can handle while safely riding the bike. There's a clip of me jumping on it with my 75kg

More photos in the Instagram story highlights folder